How to Make Beaded Christmas Ornaments (3 Easy Designs for Your Tree)
A handmade ornament does something a store-bought one rarely can: it looks like it belongs to your tree. Beaded ornaments are a lovely place to start, because a few strands of beads and a spool of wire turn into small, sparkly shapes that catch the tree lights.
I’m sharing three simple designs that use the same basic supplies: a red and ivory candy cane, a pearl and clear bead snowflake, and a green and gold star. Each one is built from wire and 6 mm beads, so if you have made a beaded charm before, the skills will feel familiar. I’d start with the candy cane, since it teaches the loop and the curve the other two designs build on.
This post contains affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you. Content on Life With Amanda is created with the help of AI.
What You Will Need
- Red glass beads: 6 mm round glass beads in a classic Christmas red for the candy cane stripes.
- Ivory pearl beads: 6 mm glass pearls in ivory white for the candy cane and the snowflake.
- Clear glass beads: 6 mm transparent round glass beads for the snowflake tips.
- Green glass beads: 6 mm glass beads in a deep Christmas green for the star.
- Gold beads: 6 mm smooth round gold spacer beads for the points of the star.
- Gold craft wire: 22 gauge gold wire, stiff enough to hold a shape and soft enough to bend with pliers.
- Jewelry pliers set: round nose pliers for the loops, chain nose pliers for bends, and wire cutters.
- Narrow red ribbon: 1/8 inch satin ribbon for the hanging loops.
- Bead mat: a soft flocked mat that keeps beads from rolling away.

Before You Start: Plan Your Colors and Size
Pour a small pile of each bead color onto the bead mat before you cut any wire. Red and ivory for the candy cane, ivory and clear for the snowflake, and green and gold for the star give each ornament its own look while still working together on one tree.
All three designs use 6 mm beads, which makes ornaments about 2 to 4 inches long. That is a good size for a tree: big enough to see, light enough not to bend a branch. Beads labeled the same size can vary a little from pack to pack, so lay a few in a row next to a ruler and check the length before you commit to a count.
Make one sample of each design first. It takes a few minutes and shows you whether the wire length and bead count suit your beads before you cut a whole set.
Design 1: Beaded Candy Cane

- Cut the wire: cut a piece of gold wire about 6 inches long.
- Make a stopper loop: use the round nose pliers to curl a small closed loop at one end of the wire. This keeps the beads from sliding off.
- String the stripes: slide on 16 beads, alternating red and ivory, starting with red. The beaded section should measure about 4 inches.
- Curve the hook: hold the wire about 1 inch below the top and bend it over a marker or the barrel of your pliers to form the curved top of the cane.
- Finish the top: trim the extra wire to about 1/4 inch past the last bead and curl it into a small loop so no sharp end shows.
- Add the ribbon: tie a 6 inch piece of narrow red ribbon around the curve and knot the ends into a loop for hanging.
Design 2: Pearl and Clear Bead Snowflake

The snowflake is made from three beaded wires that cross at the center, which gives it six spokes.
- Cut three wires: cut three pieces of gold wire, each about 4 inches long.
- Loop one end of each wire: curl a small closed loop at one end of every piece.
- String half a spoke: on each wire, slide on one clear bead and then three ivory pearls. Push them down against the loop.
- Leave the center bare: leave about 1/2 inch of bare wire in the middle, then add three more pearls and one more clear bead.
- Close the other end: curl a small loop at the end of the wire to hold the beads in place. Repeat for the other two wires.
- Cross the wires: stack the three wires so their bare centers cross like an asterisk, then spread the spokes evenly.
- Wrap the center: wrap a short piece of wire around the crossing three or four times, trim it, and press the end flat with the chain nose pliers.
- Add the ribbon: thread a 6 inch piece of ribbon through the loop at the tip of one spoke and knot it for hanging.
Design 3: Green and Gold Beaded Star

This star is two beaded triangles laid over each other to make six points.
- Cut two wires: cut two pieces of gold wire, each about 8 inches long.
- String a triangle: on one wire, slide on five green beads and one gold bead, then repeat two more times, for 18 beads in all. Leave about 1 inch of bare wire at each end.
- Bend the corners: bend the wire right next to each gold bead to form the three corners of a triangle, with a gold bead at each point.
- Close the triangle: bring the two bare ends together, twist them two or three times, trim, and tuck the ends in with the chain nose pliers.
- Repeat: make a second triangle the same way.
- Join them: lay the second triangle upside down on the first so the points make a six-point star.
- Bind the crossings: wrap a short piece of wire around each place where the sides cross, trim, and tuck in the ends.
- Add the ribbon: tie a 6 inch piece of ribbon around one gold point and knot it into a loop.
How to Hang and Display Your Ornaments

Hang them on sturdy branches toward the front of the tree, where the lights can catch the beads. A few clustered together look fuller than one on its own, and the three designs look nice mixed through a tree that has simple glass balls.
Beyond the tree, you can tie one onto a wrapped gift, hang a few from a mantel garland on short lengths of ribbon, or loop one over a doorknob or cabinet handle.
Tips and Troubleshooting
- If the wire kinks: a sharp kink weakens the wire, so cut that section off and restart with a fresh piece.
- If the candy cane will not hold its curve: bend it a little past the shape you want, since the wire springs back slightly.
- If the snowflake spokes will not stay even: add one more wrap at the center and adjust each spoke with your fingers before the last wrap.
- If the triangles come out uneven: count the beads on each side before you bend, and keep the same number between each pair of gold beads.
- Keep ends tucked: run a finger around each finished ornament to check that no sharp wire end is showing.
- Keep small parts out of reach: beads and wire are small parts, so hang these ornaments out of reach of young children and pets.
Packaging Them as Gifts
A set of three, one of each design, makes a sweet small gift. Slip them into a little kraft box with tissue paper, or tie one onto a package with the ribbon. If you are gifting several, a short handwritten note that says the ornaments are decorations, not toys, is a thoughtful touch.
Keep the Handmade Christmas Going
If you enjoy working with beads, my Christmas beaded bag charms use the same beads and a similar wire technique, and the cinnamon applesauce ornaments make a fragrant, rustic companion on the same tree. For something softer, these no-sew felt holiday ornaments are a quick afternoon project. I can’t wait to see how yours turn out.